Configure your Network Printer for Macs

In order to network your printers, you must first determine what IP addresses the printers have defaulted to.

• First confirm your printers have 2 cables: a power cable and an Ethernet cable that runs to your router.
  
  
• Turn your printer on and press and hold the button on top of the printer until the light flashes once. Release the button and the network configuration page will print.
  
  
• Enter the IP address of a ZebraNet Print Server into a web browser to access the Znet2's homepage.
  
  

• Click on "View Printer Configuration" to access ZebraNet Internal Wired PS.
  
  

• Click on "Print Server." A login prompt should pop up. Username is "admin" and password is "1234":
  
  

• Hit OK. This will take you to the Print Server Configuration Page.
  
  
• Next click on "TCP/IP Configuration"
  
  
  

• Ensure that the IP address is set correctly and the IP address resolution must be set to PERMANENT. When you are done, click on "Submit" button at the bottom.
  
  
  

• You will see a link "unit must be rest for new values to take effect." Click it.